Sign In
Learn bits
Science & Tech.
Mahesh

08/11/23 05:40 AM IST

How is electricity transmitted?

In News
  • Electric power transmission is fundamental to economic development and prosperity. This article tells about the electric power transmission.
Forms of Energy
  • Since energy exists in many forms, like light, sound, heat, etc., power and power transmission also exist in many forms.
  • For example, mechanical power in a car is transmitted using gears.
  • Electric power transmission is more complicated because of the multiple phases of electric current, and factors like voltage, impedance, frequency, etc.
  • Any power supply system has three broad components: generation, transmission, and distribution.
  • Electricity is generated at power plants as well as smaller renewable-energy installations.
  • Then it is transmitted using a distributed network of stations, substations, switches, overhead and underground cables, and transformers, among other elements.
  • Finally, it is distributed to consumers in a standardised way, befitting the needs of various machines and applications.
Basics of Transmitting electricity
  • First, in any conductor that transports electric current, the transmission efficiency is higher at lower current and higher voltage.
  • This is because the energy loss during transmission increases as the square of the current, whereas the amount of voltage increase corresponds on a 1:1 basis with the amount of current decreased.
  • That is, if voltage is increased by 5 units, the amount of current will drop by 5 units, but the amount of energy lost will be reduced by 25 units.
  • This is the purpose of transformers: they increase the voltage and reduce the current before feeding into transmission lines, and the reverse when receiving current to be supplied to consumers.
  • Transmission cables can be seen transporting current at 115 kV, 230 kV, etc. for this reason.
  • However, more than 2,000 kV or so is infeasible because then air itself becomes conducting, causing the cable to ‘leak’ current.
  • Second, the cables that move the current still have some resistance, which results in some energy loss.
  • The amount of loss can be controlled by adjusting the cable’s thickness: the thicker it is, the less energy is lost, but the cost increases. So when the commodity cost of the cable’s material is high, the cables are thinner.
  • Third, the longer the distance of transmission, the lower the transmission cost.
  • All these factors are further complicated by the use of alternating current (AC).
  • AC can be modified more easily in transformers than direct currents (DC) and also has higher transmission efficiency.
  • But when the AC frequency is higher, the amount of resistance the current encounters in the material increases.
AC power
  • The most common way to transfer electric power is in the form of three-phase AC.
  • In AC, the voltage flips polarity. If one polarity urges the current to flow in one direction, the opposite polarity urges the current to flow the other way. The AC frequency is equal to the voltage flipping frequency.
  • Imagine this voltage change to be mapped to a circle: it completes one semi-circle (180°), from top to bottom, as it flips one way; when it flips the other way, it completes the other semi-circle (180°) and is back to its starting point.
  • In a three-phase AC circuit, there are (at least) three wires. When current starts to follow in Wire A, the voltage is at 120°; in Wire B, it is 240°; and in Wire C, it is 360°. These are the three phases.
  • All three wires transport AC power.
  • Consumers, for example households, receive three such wires from where they can draw power for various appliances. These appliances are also designed to use AC because it is easier to control than DC.
Power Transmission
  • In a three-phase AC circuit, each wire transmits an AC current in a different phase.
  • From a power station, the wires are routed to transformers that step-up their voltage. Then, they are suspended from transmission towers, which must be stable and properly wired, as they travel long distances.
  • Insulators in contact with the wires draw away some current if there is a surge in the line; circuit-breakers ‘break’ the circuit if there is too much.
  • The towers are also grounded and equipped with arresters that prevent sudden increases in voltage – such as due to a lightning strike – from affecting the wires. Similarly, dampers prevent vibrations in the wires from affecting the towers’ stability.
  • Switches are used to control the availability of current and to move currents between different lines.
  • Distribution substations step-down the voltage in power lines and prepare them for consumption. Transmission substations merge or fork different lines and diagnose problems in different lines.
  • All these centres require their own support and safety infrastructure, from electrical engineers to fire protection, from connections to computerised operations to facilities for staff.
National Grid
  • A national grid includes all three components, and as a result transmission also has to account for the particulars of power production at different types of sources, at various locations, and how and where that power is consumed.
  • Grids also have storage facilities that store electrical energy when there’s a surplus supply and release it in times of deficit.
  • They are also connected to sources like gas turbines that can provide power on short notice, such as during emergencies, as well as automated systems that ‘tell’ sources to increase or decrease their output in response to fluctuating consumer demand.
  • Grids also need to respond to failure in different parts of the network and prevent them from carrying over to other parts, adjust voltages in response to demand (as well as manage demand), control the AC frequency, improve the power factor (the power drawn by a load versus the power available in a circuit), etc.
  • A grid becomes a wide-area synchronous grid if all the generators connected to it are producing an AC current at the same frequency.
  • The world’s largest such grid covers Azerbaijan, Belarus, Georgia, Kazakhstan, Kyrgyzstan, Mongolia, and Russia; the world’s most powerful is the North Chinese State Grid, with a connected capacity of 1,700 GW.
  • India’s national grid is also a wide-area synchronous grid.
  • Such grids result in lower power cost but also require measures to prevent cascading power-supply failures.
Source- The Hindu

More Related Current Affairs View All

15 Nov

Government issues guidelines to curb misleading ads by coaching centres

'The central Government issued new guidelines aimed at curbing misleading advertisements by coaching institutes, specifically prohibiting false promises such as "100 per cent selec

Read More

15 Nov

Janjatiya Gaurav Divas

'Every year on November 15th, Janjatiya Gaurav Divas is celebrated to honor the contributions of these communities, especially in India’s freedom struggle.' 5th November

Read More

15 Nov

Supreme Court’s order on mandatory accessibility standards

'A bench of the Supreme Court last week ordered the Union government to frame mandatory rules for ensuring the accessibility of public places and services to persons with disabilit

Read More

India’s First Ai-Driven Magazine Generator

Generate Your Custom Current Affairs Magazine using our AI in just 3 steps